Best camera slider for video? (Budget vs Quality)
During the 2D content shooting, the camera dolly can shoot very smooth and excellent action. It's easy to install any VR camera on a mobile camera, but it's equally cumbersome, and most of the car's brackets are captured. And because of its large size, it takes more than one operator to control it, and there are tracks, so there is a large screen that is blocked. It is almost impossible to repair these obscured content without spending too much a budget, which means that a mobile filming car is not a good solution.
The camera slider is a section of track that varies in length and uses different materials. The bracket is attached and you can move the camera on the camera slider at different speeds. You can usually use a computer to create complex movements that make them repeat themselves.
Camera dolly slider SK-DS60
The Camera Dolly Slider SK-DS60 can be used as slider or dolly and moves from straight slides to curved movement. It offers you the ability to create good-quality production shots without over-extending your budget. Featuring heavy-duty anodized aluminum construction, standalone feet, adjustable axles, super-smooth glide rail, spirit level & tension adjustment, Dolly Slider SK-GTD60 gives you the best value. It can be attached directly to a tripod and may also be used standalone with the included feet, which raises your camera setup approximately 2" off the ground. And it can also be used as a dolly with the included adjustable axles.
Size: 61*13*12 cm
Procuce weight: 1.57 KG
Length: 60 cm
Different camera slider difference is very large, both in camera slider size or the speed of the motor. You'll need a camera slider with enough intensity to support the camera and choose the right motor to drive the camera with enough speed to complete the exercise and reduce the chances of mistakes. Those cheaper stents will produce significant backlash when the movement stops and at the beginning, which is a very undesirable exercise issue in VR photography.
The camera slider is much smaller than the camera dolly, but usually has a fairly long track that is also clearly visible in the shot. There is no easy way to remove it unless it is overwritten with an image. Learn more in the Clean Plates section below.
More information about sevenoak camera stabilizer,camera dolly,
