Camera tripod is divided into tripods, monopods, octopus bracket and so on. The most common is the tripod, and now many of the tripods can be removed as a single tripod mount head.
Tripod mainly play a stabilizing role, so the tripod needs strong. However, since it often needs to be carried, it needs to be lightweight and easy to assemble. Generally used material of the tripod in three or four hundred or so, there are thousands of high-end. Its function is similar.
To fix the camera on a tripod, first attach a quick release plate to the camera and a screw hole in the camera. Screw the screw on the quick release plate and fix it.
In the case of often using a tripod outside shot, the quick release plate can be installed on the camera put more convenient.
The camera's quick release plate is pre-installed. Then the first step is not to use a tripod out of the camera, but the tripod fixed.
First remove the tripod, and then open the triangle. In the foot position there is a choice of open angle limit slot. The tripod to choose the same gear limit slot.
Then adjust the length, the tripod is divided into sections, the use of a solid. Each one is best for a section of the lengthening. This means that each tripod opts to open the same section.
Loosen the set screw and extend the stand. Tighten the screws again.
The tripod to choose a flat location, at least to ensure its stability, will not shake the fall.
Next is to adjust the tripod head.
tripod head is mainly divided into three-dimensional tripod head and spherical tripod head, tripod head used in photography more common.
The advantages of a spherical tripod head portable, spherical tripod head generally have 3 knobs. One is the horizontal rotation knob
The other two are the ball fixed knob, the two loose the ball can rotate at any angle. Then tighten it again.
If it is horizontal shooting suggestions observe the tripod head on the level of the instrument, the level of tripod head adjustment and then install the camera.
more information about sevenoak camera slider,